GENERAL INSTRUCTIONS
CONNECTING THE LP CYLINDER AND PIPE
WARNING:
MAKE SURE THE VALVE OF THE LP CYLINDER OR REGULATOR IS
CLOSED. THE LP CYLINDER MUST BE REPLACED AWAY FROM ANY
SOURCE OF HEAT OR IGNITION.
A. Connect the LP cylinder.
a) Screw the included cylinder regulator turning clockwise (1).
Position the regulator so that the vent hole (2) faces down.
b) Screw the gas cylinder regulator turning anti-clockwise (3) (4).
1
B. Place the cylinder on the floor behind the compartment.
C. Place the LP cylinder so the valve opening faces to the rear of the oven.
D. Connect the included hosepipe to the junction (a) at the back of the oven.
Fix the hosepipe with the included security straps.
WARNING:
CHECK HOSE EACH TIME BEFORE USING THE OVEN FOR NICKS,
CRACKING, ABRASIONS OR CUTS. IF THE HOSE IS FOUND TO BE
DAMAGED IN ANY WAY,DO NOT USE THE OVEN.
24
All manuals and user guides at all-guides.com
2
INSPECTION OF THE FLEXIBLE PIPE
Please control the integrity of the hosepipe
a
before using
3
.
4