Vulcan VACB25 Manuel D'installation Et De Fonctionnement page 16

WOOD SMOKER BOX ACCESSORY
The charbroiler and its parts
are hot. Use care when operating, cleaning
or servicing the charbroiler.
WOOD SMOKER BOX INSTALLATION
1. Remove all charbroiler radiants and top grates.
2. Remove the legs, crumb tray and heat deflector
trays.
3. Set charbroiler in place so that the threaded leg
attachment points of the charbroiler align with the
holes in the top of the wood smoker box.
4. Secure the charbroiler in place with four 5/8"-11 X
3/4"L hex head bolts and 5/8" washers. The bolts
should pass through the top of the wood smoker
box and into the charbroiler leg attachment
points. If applicable, secure the two frame halves
together with three 1/4"-20 x 3/4"L bolts, washers
and lock nuts.
5. Reinstall charbroiler burners, radiants and top
grates.
WOOD SMOKER BOX CLEANING
1. Daily, when unit is cool, empty burned debris from
the trays.
2. Clean wood trays and crumb trays.
Use caution when disposing
of burned debris from wood trays. Ensure
contents are completely cooled. Discard into
approved, flammable proof containers only.
BOTTOM VIEW OF CHARBROILER
CENTER PAN GUIDE
16
- -
SIDE PAN GUIDES