Power Fist 9099706 Mode D'emploi page 4

9099706
SPECIFIC SAFETY PRECAUTIONS
WARNING! The Auto-Darkening Welding Helmet does not protect against
severe impact hazards, explosions or corrosive liquids. Machine guards or
eye splash protection must be used when these hazards are present.
WARNING! Using filter forms from any other manufacturer's helmet can
seriously impaired the protection provided and may result in serious
personal injury.
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an unintended
purpose.
2. Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3. This auto-darkening welding helmet is not recommended for overhead
welding applications, laser welding or laser cutting applications.
4. This welding helmet is not suitable to laser welding and oxy-acetylene
welding.
5. In the event of electronic failure, the filter remains dark to protect
against UV and IR radiation according to Shade 13.
6. The auto-darkening welding filter should always be used with original
inner and outer cover lenses. Never open or tamper with the filter
cartridge.
7. Ensure the front cover lens is mounted before use and remove the
protective film.
8. Ensure that the lens is clean and there is no dirt or spatter covering
the sensors at the front of the filter cartridge.
9. Inspect all parts for signs of wear or damage. Any scratched or cracked
parts should be replaced prior to use.
10. Never place the helmet on a hot surface.
11. Arc rays can burn both eyes and skin. Arc welding produces intense
visible and invisible (ultraviolet and infrared) rays. Wear a welding
helmet fitted with the proper shade to protect your face and eyes
when welding or watching.
12. The reaction of the filter' s liquid crystal will be slower if the ambient
temperature is low, but it will not affect protective functions.
4
Flip-Front Auto-Darkening Welding Helmet
For technical questions call 1-800-665-8685
V1.0