Publicité
Les langues disponibles
Les langues disponibles
Install remote receiver
Install canopy
□ Ensure the loosened screws is
inserted into the key holes on the
mounting bracket.
□ Carefully raise the canopy up to
the mounting bracket. Rotate the
canopy clockwise.
□ Secure the canopy by replacing
the screws previously removed and
tightening the screw previously
loosened
□ Place the canopy cover (if
applicable)and rotate the canopy
cover clockwise until it locks into
position.
14
□ Insert the receiver into
the mounting bracket with
the flat side of the
receiver facing the ceiling.
Fastening the blade arms to
the motor
□ Remove the pre installed screws
□ Install the fan blade on the corresponding screw hole, and then
install and fix it with the removed screws.
Phillips
screwdriver
Fan-Motor
assembly
Blade
washer
Spring washer
Blade screws
15
Publicité
