Publicité
Les langues disponibles
Les langues disponibles
□ If there is an existing outlet box,ensure it is clearly marked
"Suitable for Fan Support". if not, it must be replaced with an
approve one.
□ Secure the outlet box (or make sure the existing box is secured)
directly to the building structure. Use appropriate fasteners and
building materials.wood joist and outlet box must be able to
support a minimum of 50 pounds.
□ Fig.1,2 and 3 are examples of different ways to mount the outlet
box in different situations.A hanger support bar may be required.
Fig.1
Outlet Box
Recessed
Outlet Box
Fig.3
Fig.4
12
Outlet
Box
Fig.2
Provide Strong Support
Celling
Mounting Plate
Hanger Bar
(not included)
Outlet Box
Assembly - Hanging the Fan
Install downrod assembly
□ Carefuly feed the molor wires up though
the downrod
□ Align the holes and replace hanger pin
and locking pin.
□ Tighten the two colar setscrews.
□ Slip coupling cover,canopy coverand
canopy onto the downrod.
Hang the fan
□ Lift the fan motor assembly up to the
mounting bracket and seat the hanger ball
in the mounting bracket socket. Rotate
the fan motor assembly until the check
groove drops into the registration slot and
seats firmly.The downrod should not
rotate if the is done correctly.
13
Publicité
