Publicité
Les langues disponibles
Les langues disponibles
Pre-Installation(continued)
PACKAGE CONTENTS
Remote control
(Transmitter)
Hanging Pin
Pls check whether above accessories are completed or not?Yes,
and install.
08
Remote control
(receiver)
Slide-on mounting bracket
Canopy
4.9"Ball/downrod assmbly
10"Ball/downrod assmbly(standy)
"R"Locking Pin
Coupling cover
Fan-motor assembly
Balde
F
Light kit fitter assembly
LED
H
Lamp Shade
I
Installation of the hanging
bracket (suspension part)
Mounting
Bracket<A>
Self tapping
screw<B>
STEP 1 A-WOODEN CEILING
SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT
G
BREAKER FUSE BOX.
1) Use the Mounting Bracket (A) as a guide, mark the spots
where the 4 Self Tapping Screws (B) will be drilled.
2) Remove the Mounting Bracket (A), drill 4 holes for 3MM
diameter, install the mounting bracket onto wooden ceillng with
the 4Self Tapping Screws (B).
WOODEN CEILING
For wooden ceiling,
use wood screw to
drill on the wooden
beam or the
"junction box" to fix
the hanging
bracket(selection is
made according to
actual requirements
of the customers)
09
Publicité
