RISCO Group Industrial LuNAR DT AM Grade 3 Guide D'installation page 7

All manuals and user guides at all-guides.com
LED STATE
Steady
Red
Flashing with low frequency
Flashing with high frequency
Steady
Green
Flashing
Steady
Orange
Flashing
All LEDs Flashing with change of color
INSTALLATION
Preliminary steps:
♦
Before installation, study the space to be protected carefully in order to choose the exact location of
the unit for the best possible coverage.
♦
Never install the Ind. LuNAR RK200DTG3 in an environment that causes an alarm condition in one
technology.
♦
Avoid installations where rotating machines (e.g. fans) are normally in operation within the coverage
pattern. Point the unit away from glass exposed to the outdoors and objects that may change
temperature rapidly.
♦
Do not mount the detector in direct sunlight or near any heat sources. Detection sectors should be
pointed either towards a wall, floor but not towards windows or curtains. The installation surface
should be solid, smooth and vibration free
♦
Eliminate interference from nearby outside sources.
6
MEANING
Detector alarm (simultaneous PIR and MW
detection)
Indicates malfunctioned communication with
ProSYS
AM detection
Microwave detection
Trouble in the MW channel
PIR detection
Trouble in the PIR channel
Upon power up
Ind. LuNAR RK200DTG3 Installation Guide