Publicité
Les langues disponibles
Les langues disponibles
4. Connection Wiring Descriptions and Illustrations:
When the mode for Switch has been selected, you can then install the ST5610 with the
following connection wiring methods. It is recommended you use 1394b cables to connect
to the computer for better performance.
A. Connect two 1394b cables to the interfaces of the computer (most recommended
installation method).
Please ensure each
plug has connected
tightly before turn
on the power.
Raid 0
1
JBOD
2
1
2
1394b
B. Connect a 1394b cable to the interface of the computer and connect another 1394b
cable serially to the rear panel of the ST5610. (The method is recommended if there is
only a 1394b interface of your motherboard.)
Please ensure each
plug has connected
tightly before turn
on the power.
Raid 0
JBOD
1
2
1
2
1394b
7
Hardware Installation Procedure
Computer Back Panel
Computer Back Panel
Publicité
