Publicité
Les langues disponibles
Les langues disponibles
B. Operating Instructions for Macintosh
After the hardware installation for the ST5610 is completed, you can restart the system
and connect the device to Macintosh.
Hard Disk Drive Format (same as in the Windows format function)
a. Move the cursor to the Toolbar on the Desktop, and select the Disk Utility. A disk tool
window will pop up with several function tabs, such as First Aid, Erase, Partition,
RAID and Reinstall.
b. Select the Erase tab. If the disk device is ready, the disk information will be displayed
on the left window.
c. To erase all data and volumes on a disk, please select the icon for the disk drive and
a Volume Format and enter a name and then click "Erase". A dialog will pop up with
the following message, "Erasing a disk will destroy all information on the volume of
the disk. Are you sure you wish to erase the disk 'XXX'? Cancel or Erase" If you wish
to erase, please click "Erase". After the disk is formatted, you can use the ST5610
normally. Please refer to the figure for instructions.
11
Hard Disk Drive Format Procedure
Publicité
