Gallagher HR4 Notice D'installation page 20

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual
4. To initiate a connection from the HR4 Reader, press the
Search
This will search for new Bluetooth devices in range. As the
name of each device is received it will be displayed,
replacing the Bluetooth address.
5. Use the arrow keys to select a device to connect to and
press the
The connection status will change to Trying to connect...
6. Press
menu.
Note:
• If the connection is not dropped, and the device is in range,
the HR4 will attempt to reconnect once, when next powered
up.
18
softkey.
OK
button.
Note: The HR4 can be configured to
send and/or receive data from other
devices via Bluetooth.
See Info soft-key (following page) for
further details when connecting to
Bluetooth.
Return
key to save settings and return to the Main
Important: You may be prompted for a
passkey code to complete the Bluetooth
pairing.