Télécharger Imprimer la page

Gallagher HR4 Notice D'installation page 19

Masquer les pouces Voir aussi pour HR4:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 57
3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual
Wireless - Bluetooth®
The HR4 Reader is Bluetooth® enabled and can be searched for
and connected to by other devices (Discoverable), or perform a
search to initiate the connection itself. Only one Bluetooth
enabled device can be connected to the reader at any time.
Icon Descriptions
Icon
Flashing
Steady
Blue
Grey /
Red line
No icon
Wireless Setup
1. From the Main Menu screen, use the arrow keys to select the
Bluetooth icon
2. The Wireless screen will display, showing the last known
connection.
• If you don't want Bluetooth connected, select the field where
Bluetooth is displayed and press OK. Use the arrow keys to
change the communication type and press OK.
Note: Selecting
battery power if a communication connection is not required.
3. The connection status and device table display and the
connection status changes to 'Discoverable' mode.
The Reader can now be searched for and found by other
devices (Discoverable). The status of the current connection is
displayed on the screen.
Description
Searching for a Bluetooth device
Bluetooth device connected
No Bluetooth connection active, Reader is
Discoverable, or Reader is trying to connect to
a device.
Bluetooth is disabled
OK
and press
<none>
will turn off Bluetooth, and save
Note: The table will be empty if no
devices have previously been found. Any
previously connected devices will be
displayed in parentheses, e.g. '(Gallagher-
TSi)'.
.
17

Publicité

loading