EINHELL TP-RO 18 Set Li BL Instructions D'origine page 23

•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Cordless routing unit
•
Router insert
•
Palm router insert
•
Extractor adapter (2x)
•
Compass point
•
Clamping sleeve 6+8mm
•
Routing guide
•
Parallel stop
•
Open-ended wrench (2x)
•
Copy sleeve
•
Safety guard
•
Original operating instructions
•
Safety instructions
3. Proper use
This cordless router/palm router is designed pri-
marily for the machining of wood and plastic. Its
uses include the cutting out of knots, the cutting
of slots, the forming of recesses, the copying of
curves and lettering, fl ush-trimming, etc. This
cordless router/palm router is not allowed to be
used for the machining of metal, stone, etc.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Anl_TP-RO_18_Li_BL_SPK13.indb 23 Anl_TP-RO_18_Li_BL_SPK13.indb 23
GB
4. Technical data
Motor power supply: .................................... 18 V
Idling speed: .......................10,000 - 30,000 min
Stroke height: ................... 40 mm (routing depth)
Clamp: ............................... Ø 8 mm and Ø 6 mm
For routing cutters max.: ........................... 30 mm
Weight Cordless router: ............................ 2.4 kg
Weight Cordless palm router: .....................1.3 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
L sound pressure level ..................... 80.4 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ........................ 91.4 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Handle
Vibration emission value a
K uncertainty = 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
noise emission values can also be used to make
an initial assessment of exposure.
Warning:
The vibration and noise emission levels may vary
from the level specifi ed during actual use, depen-
ding on the way in which the power tool is used,
especially the type of workpiece it is used for.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
- 23 -
-1
= 1.983 m/s
2
h
2
10.10.2023 08:45:28 10.10.2023 08:45:28