Bosch GST18V-50 Consignes D'utilisation/De Sécurité page 13

To attach, hook Overshoe 13 over front of metal
Footplate 12 and snap into place at rear of foot-
plate.
Anti-Splinter Insert
(Fig. 7)
To minimize splintering of the top surface of
the material being cut, place the JA1013 Anti-
Splinter Insert 18 in the blade opening of the
Footplate 12.
Note: This insert will only work with blades
that have ground sides such as T301CD, T101B,
T101D, and T101DP.
Dust Cover
(Fig. 8)
Fit the hood before you connect the power tool
to the dust extraction system.
Attach the Hood 19 to the power tool so that the
bracket locks into place on the Shock Protection
Guard 1.
Remove the Hood 19 when working without a
dust extraction system, blade installation/re-
moval, and for miter/bevel cuts. To do this, pull
the hood forwards off the Shock Protection
Guard 1.
Connecting The Dust Extraction
(Fig. 9)
Fit the Extraction Outlet 20 in the recesses of
the Base Plate 12. Rotate the Allen wrench head
clockwise to allow connection of the Extraction
Outlet 20. Connect a dust extraction hose (not
included) to the Extraction Outlet 20.
Switch off the sawdust blower device when you
have connected the dust extraction system.
160992A88D GST18V-50 B 202302.indd 13
Assembly
Fig. 7
(18)
Fig. 8
(1)
(19)
Fig. 9
-13-
(12)
(20) (12)
2/14/23 10:53 AM