Publicité
Les langues disponibles
Les langues disponibles
3. Remove the footrest (10). Use
the Allen key (H) and remove the
2 screws. Pull out the footrest.
4. Remove the plastic cover(11)
from the legs. Use the Allen key
and remove the 8 screws. Take off
the plastic cover(11).
5. Remove the long legs (5)
& (6).
Use the Allen key (H) and remove
the screws. Then pull out the 4
long legs.
16
Assemble the short leg
Align the short leg (7) & (8) with assembled connector.
Insert the barrel nut (E) into the hole in the assembled connector. Ensure the "x" mark
is facing outward.
Then insert one fixing screw (C) into the hole in short leg (7) & (8) and tighten with
Allen key (H). Ensure the screws are fully tightened and screw is tight with barrel nut.
Repeat the same procedure for the rest legs.
Ensure to keep the pre-drilled holes at the same side.
WARNING:
Failure to fully tighten screws may cause instability.
17
Publicité
