Publicité
Les langues disponibles
Les langues disponibles
Insert one screw (B) into the holes allocated on the outside of the long leg and tighten
with Allen key(H). Ensure the screws are fully tightened.
P3
Assemble the supporting plate
Following the FIG., align the plastic cover (11) on the 4 legs , insert 2 screws (A) into
the holes inside each leg and tighten with Allen key(H). Ensure the screws are fully
tightened.
P1
10
P4
P2
P3
Attach the rubber stoppers
Screw rubber stopper (F) onto the ends of the long legs. Turn the rubber stopper
clockwise to tighten and secure. Repeat for the other 3 legs.
Adjust stoppers to be level with the floor. The highchair should not wobble.
Assemble the seat
Position the seat unit (1) over the assembled wooden legs. Align the holes ensuring
that the seat and the footrest are on the same side.
11
Publicité
