HumanTechnik PL-100 Mode D'emploi page 6

Microphone
Neckloop
2
Inserting the batteries
The PL-100 requires three hearing aid
batteries (type 675, LR44)
1. Open the cover on the back of the
PL-100 by pushing it outwards
2. Insert the three batteries so the +
sign matches up with the + mark in
the battery compartment (spring
contact end).
English 6
1
Induction loop fastener
3. Insert the batteries in the following
order:
1. first battery between +ve termi-
nal and plastic stops
2. place the second battery against
the -ve terminal
3. insert the third battery between
the first and second batteries.
4. Replace the battery cover.
On/off switch
Volume control
Connection lead
(1 m) with 2.5 mm
jack plug