l3
Connection possibilities
Either the built-in electret microphone can be
used or the separate microphone MKE 2013 (see
also „ACCESSORIES" on Page 19) connected
to the 2.5 mm dia. cinch jack (B1).
The 3.5 mm dia cinch jack (B2) is available for the connection of high-level sound sources,
such as tape recorders, TV and Hi-Fi components.
The connection cable of the connected additional microphone MKE 2013 acts as an
antenna. If the additional microphone MKE 2013 is not used, the included additional
antenna must be inserted in the microphone jack.
Indicator lamps
The transmitter is equipped with a red indicator LED (L3) for monitoring the battery
output. The end of the operating period is announced with flashing approx. 15
minutes before the end of operation, so that there is sufficient time to replace the
RECHARGEABLE or standard battery pack.
All manuals and user guides at all-guides.com
MICROPHONE MKE 2013
Transmitter SK 2013 PLL
m
b2
b1
b1
25 cm
2.12