Bodet BoxPro Manuel Utilisateur page 21

4. Equipment configuration
4.1 Retrieving network settings
It is possible to retrieve the BOXPRO network settings, such as:
- IP address,
- Subnet mask,
- MAC address.
To retrieve this information:
Insert a USB key (without any firmware for the BOXPRO) into the BOXPRO.
Wait a few moments and watch the LED on the front panel, indicating that the settings file has been
deposited on the USB key.
Refer to chapter 5.1 LED behaviour.
Remove the USB key from the BOXPRO.
Open the «Boxpro_informations.txt» file located on the USB key from a PC.
4.2 Update procedure
To proceed with the BOXPRO update:
Contact our sales/export department to obtain the updated firmware.
Access the BOXPRO configuration site (General settings page)
Refer to chapters 3. Equipment configuration and 3.3.3 General settings page.
On the General settings page, click on the
Click on then select the firmware file from the Windows explorer.
Once the firmware has been imported, click on
Wait while the firmware is being installed and watch the behaviour of the LED on the front panel.
Refer to chapter 5.1 LED behaviour.
When the LED stops flashing, the installation is complete.
Complete the installation by clicking on "Reload page".
As a reminder:
In order to work, the firmware versions of the SCOREPAD main keyboard and
the BOXPRO must be identical.
button, a window opens.
Update BoxPro
.
Start update
EN
21