Bodet BoxPro Manuel Utilisateur page 14

Safety information
The following icons are used to indicate risks or sources of danger when installing, using and
maintaining this product.
Symbol
IEC60417 - 1641
Operating instructions
IEC60417 - 0434b
Caution
1. Initial checks and general information
Thank you for choosing this product. This product has been carefully designed to ensure your
satisfaction, adhering to quality processes ISO9001 and ISO14001.
We recommend that you read this manual carefully before installing the product.
Retain this manual for reference throughout the lifespan of your product so that you can refer to it when
necessary.
Any use not in accordance with these instructions may cause irreversible damage and invalidate the
warranty. In that case, Bodet cannot be held liable.
Non-contractual data. BODET reserves the right to make certain functional, technical or aesthetic
changes to the products without prior notice.
This manual is subject to change without notice. To obtain the latest version of this documentation,
please refer to our website: www.bodet-time.com.
1.1 Unpacking the product
Carefully unpack the product and check the content of the package. This must include:
the BOXPRO interface box,
the power supply unit (cord length: 1.5m),
an RJ45 cable (length: 2m),
The user manual of this product is available by scanning the QR code displayed on the front panel of
the BOXPRO.
1.2 Safety instructions - precautions for use
Read the safety instructions carefully before installing the product.
Observe the safety tips at all times during installation, use and maintenance of the product.
Key to symbols:
: indicates advice, a recommendation or other practical information,
: indicates that special attention needs to be paid.
Installing the product
Installation and maintenance of this device must be carried out by qualified
personnel.
The electrical installation of this material should be compliant to the electrical
standards in force in the country where the product is used.
Opening the product
There are no user-serviceable components in this product.
Contact Bodet customer service if the product needs to be repaired.
14
Description
a DATA cable (mini DIN / DIN, length: 2m),
a DATA cable (DIN, length: 10m),
the user manual.
EN