Publicité
Les langues disponibles
Les langues disponibles
3.3.2 Protocols settings page
The protocols settings page allows activating or deactivating the protocols as well as filling in the
information required to communicate with the receiving equipment of each protocol.
It is required to log in as administrator to be able to modify the configuration.
To log in as administrator, click on
BodetSport49.
Below is the description of the information displayed as well as the information to be entered to set up
the communication with the receiving equipment of each protocol.
- TV protocol :
•
Name: name of the TV protocol (useful if the TV protocol is duplicated for other equipment)
•
IP address: IP address of the control PC (if connected directly to the BOXPRO) or IP address of
the Moxa interface.
•
Port: number of the port opened on the control PC (if connected directly to the BOXPRO) or port
number of the Moxa interface.
+
The
button allows to duplicate and set up the TV protocol to another equipment.
- EBStats: refer to the user manual 608783 to proceed with the configuration.
The
buttons are used to activate or deactivate the protocols.
The
buttons are used to check the communication with the receiving equipment (PC or Moxa
Test
interface depending on the installation).
The
buttons are used to save the configuration.
Save
The
buttons provide access to help diagrams relating to the hardware installation.
i
Also see chapter 6. Installation examples.
18
and enter the administrator password:
Connect as ADMIN
EN
Publicité
