Klarstein ANTONIA Mode D'emploi page 26

EN
26
INSTALLING THE ACTIVATED CARBON FILTER
Note: An activated carbon filter is only required for recirculation mode. If you
are using the hood in extraction mode, remove the activated carbon filter.
Remove the metal grease filter. The activated carbon filter is divided into two and
is mounted on the right and left of the motor. Check that the teeth correspond
with the direction of rotation of the respective side. Turn the activated carbon filter
onto the motor housing (normally clockwise). Replace the metal grease filter.
CONTROL PANEL AND BUTTON FUNCTIONS
Switch motor on/off
Increase fan speed
Decrease fan speed
Switch light on/off
Displays the fan speed: 1=low, 2=medium, 3=high
Activate fast timer: Press the + and + buttons simultaneously and hold the
two buttons for 1 second. The digital display will flash and the device will
begin a 5 minute countdown. After 5 minutes, the motor and light will turn off
automatically and the buzzer will sound for 1 second.