DELTACALOR DIGITAL THERMOSTAT Manuel D'instructions page 52

USING THE SMARTPHONE APP
This thermostat can be controlled by means of the DELTACALOR COMFORT app, the
EN
initial configuration of which is presented on page 3 of the manual. It is also possible to
configure the Wi-Fi later, using the AD HOC function described on page 19.
CONFIGURING MULTIPLE THERMOSTATS IN A SINGLE SYSTEM
Once you have
created the home
system on the app,
you can connect
multiple thermostats if
applicable. To do this,
you need to switch on
the new thermostat
and configure it,
following the procedure described for initialising a new
thermostat (page 3). In this case, the home system
already exists, so there is no need to name a new one.
Instead, simply select the existing system and then add
the new room.
By clicking on the "home" system, you can then access
the various rooms you have set up and control their
respective thermostats.
COMFORT
This mode enables you to set a temperature that you want a specific thermostat in the
system to maintain. To do this, click the system and then the room. Click the
and set the temperature by moving the white circle. Click "Apply" to confirm and wait for
the thermostat to update.
Temperature
to which the
thermostat is
set
52
Temperature
measured by the
thermostat in the
room
icon