DELTACALOR DIGITAL THERMOSTAT Manuel D'instructions page 33

CONFIGURATION WITH QR CODE
6. Click "Open camera" and scan
the QR code on the thermostat
screen.
NOTE - if the app does not have everything it needs
to complete the configuration, the screen shown in the
figure may appear.
• WI-FI: to proceed with configuration, the device
needs to be connected to the home Wi-Fi network;
• AUTHORISATION: this is provided when you
download the app;
• POSITION: you need to enable the app to access
your smartphone's location.
7. Click "Connect" and wait for a few
seconds. You can now proceed
from point 9 of the "Adding a
system" paragraph.
33
EN