DELTACALOR DIGITAL THERMOSTAT Manuel D'instructions page 48

WI-FI SETTINGS
To open the radiator Wi-Fi settings, select WI-FI from the settings menu, using the
EN
navigation key.
Press to open the corresponding menu; use the
through the menu. To go back to the settings menu, select CANCEL and press
confirm.
WI-FI INFORMATION
This function enables you to view various items of information about the device's
network connection. Select WI-FI INFO from the options menu, then press
access the information.
CONNECTION
This function enables you to connect the thermostat to the cloud. You need to configure
the connection before you can enable this function, either during first start-up or by
using the AD HOC function.
Use the navigation key to scroll through the available
pages, and press
Available information:
• Status: Connected / Not connected
• SSID name of Wi-Fi connection
• IP address
• MAC address
Select CONNECTION from the options menu, press
make changes and then press
connection. Use the
48
navigation key again to scroll
to go back to WI-FI INFO.
again to activate the cloud
navigation key to exit the function.
to
to
to