Publicité
Les langues disponibles
Les langues disponibles
1. Lower Spare tire – Access the spare tire winch inside the vehicle, lower the spare tire and set aside for reinstallation later.
2. Remove Fascia – Remove the 6 plastic expanding fasteners using a screwdriver from the bottom of the fascia. Remove 2 screws from each wheel well using a phillips
screwdriver to remove splash guards. Remove 1 plastic expanding fastener from under each splash guard. Remove 1 plastic push rivet from each wheel well by using the
tip of a screwdriver to push the center of the pin in. Open the liftgate, remove panel near taillight to expose screw that connect the fascia to the vehicle body with a 10mm
socket, 1 each side. Starting from the wheel well gently pull off fascia. Unplug any wires that are attached.
©2023 Horizon Global Americas Inc. - Printed in Mexico
Sheet 4 of 18
76636NP
3-08-23
Rev. A
Publicité
