Morso S11 Serie Montage page 4

All manuals and user guides at all-guides.com
Installation of legs and base for the Morsø S11 series
After unpacking, the stove is placed carefully with the backside down. To avoid damage to
the stove or the floor, a sheet of cardboard may be used as underlay.
The base or the separate legs, as desired, are mounted using the washers and nuts included.
If the stove is installed with a base, the two distance rails must be positioned between the
base and the stove and then fastened to the stove together with the base.
Note: The paper in which the base or the separate legs are wrapped must not be disposed
of by burning.
4