Table des Matières
Publicité
GB
Part
Backrest
Body
Frame
Inner shell
Seat cushion
type
Cushion
Seat mesh type
Frame
Support base
Legs
Support
Structural parts
Adjust arm
Movable parts
Pad
Support
Fixed arm
Pad
Support
Small headrest
Pad
Inner shell
Large headrest
Mesh frame
Mesh
Covering material
Cloth
Backrest
Cushion material
Seat
∗ > XX < indicates the materials of the parts. This information is useful for recycling.
∗ Please understand that product specifications might change without prior notification due to improvements made
to the product.
29
Materials
Materials
Metal (aluminum) >ADC<
Glass reinforced polyamide >PA-GF<
Glass reinforced polyamide >PA-GF<
Polyurethane >TPU<
Glass reinforced polyamide >PA-GF<
Metal (aluminum) >ADC<
Metal (aluminum) >ADC<
Metal (steel)
Metal (stainless steel)
Thermoplastic polyurethane resin >TPU<
Metal (aluminum) >ADC<
Thermoplastic polyurethane resin >TPU<
Glass reinforced polyamide >PA-GF<
Polypropylene resin >PP<
Recycled polypropylene resin >PP<
Glass reinforced polyamide >PA-GF<
Polyester
Polyester
Polyurethane
Polyurethane
GB
Troubleshooting
Problem
Check
Are you sitting on the seat when
The seat
adjusting the seat height?
cannot be lifted
Is the seat height in its highest
up.
position?
Are you sitting on the front edge of
The seat
the seat?
cannot be
Is the seat height in the lowest
lowered.
position?
The seat slide
Are you sitting on the seat when
lever does not
adjusting the seat depth?
work.
The reclining
tension control
Is the backrest locked so that the
dial does not
dial does not turn?
turn.
Is the reclining control lever
locked?
Is the reclining tension control dial
set to the strongest (4) position?
Is the backrest
When the
fixed to a
reclining
position other
The backrest
tension control
than at the
does not
dial turns
default position
recline.
(upright) and
is the reclining
tension control
dial fixed in an
When the
intermediate
reclining
position, such
tension control
as between 1
dial does not
and 2?
turn
Solution
Page
Adjust the seat height while not
16
seated on the seat.
The seat cannot be lifted up beyond
16
the highest position.
Sit on the center of the seat while
16
adjusting.
The seat cannot be lowered beyond
16
the lowest position.
Adjust the seat depth while not
17, 18
seated on the seat.
Use the reclining control lever to
release the lock so that the backrest
19
moves by leaning against it.
Lift the lever to release the lock, and
19
then lean against the backrest.
Turn the reclining tension control dial
counterclockwise to set the dial at the
1 or 2 position.
Turn the reclining tension control dial
to set it to the 1 position. Hold and
release the reclining control lever, and
strongly lean against the backrest.
Repeat this a few times. When
the backrest returns to the default
position, confirm that the reclining
20-22
tension control dial is set to the 1
position correctly.
Hold and release the reclining control
lever, and strongly lean against the
backrest. Repeat this a few times.
When the backrest returns to the
default position, confirm that the
reclining tension control dial is set to
the 1 position correctly.
30
Publicité
Table des Matières
