Intended Use; Technical Data; Noise/Vibration Information - Bosch EasyAquatak 110 Notice Originale

OBJ_BUCH-2949-002.book Page 15 Monday, August 7, 2017 2:55 PM
Symbol Meaning
Movement direction
Reaction direction
Weight
On
Off
Lo Low pressure

Technical Data

Pressure washer
Article number
Rated power
Supply temperature max.
Supply rate min.
Allowable pressure
Rated pressure
Rated Flow
Maximum inlet pressure
Autostop function
Weight according to EPTA-Procedure 01:2014
Protection class
Serial number
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.153 ohm.

Noise/Vibration Information

Sound emission values determined according to EN 60335-2-79.
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to
h
EN 60335-2-79:
Vibration emission value a
h
Uncertainty K
Bosch Power Tools
Symbol Meaning
Hi High pressure
Accessories

Intended Use

The product is intended for cleaning areas and objects out-
side the house, tools, vehicles and boats, if the appropriate
accessories and cleaning agents approved by Bosch are used.
Intended use is related to operation within 0°C and 40°C am-
bient temperature.
This product should not be used for professional use.
EasyAquatak 110
3 600 HA7 F..
kW 1.3
°C 40
l/min 5.5
MPa 11
MPa 7.4
l/min 4.7
MPa 1

kg 4.50
/II
See serial number (rating plate) on pressure washer.
English | 15
EasyAquatak 120
3 600 HA7 9..
1.5
40
5.9
12
8
5.4
1

4.70
/II
3 600 ... HA7 F.. HA7 9..
dB(A) 85 80
dB(A) 94 91
dB 3 2
2
m/s 4.0 1.7
2
m/s 1.5 0.6
F 016 L81 747 | (7.8.17)