Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
ATTACHING THE BAR & CHAIN
not already attached)
1. Move ON/STOP switch to the STOP
position.
2. Make sure chain brake is disengaged
(see CHAIN BRAKE in the OPERATION
section).
IMPORTANT:
Before proceeding to next
step, ensure unit is on a flat surface and in an
upright position as shown in illustration be-
low. Chain will not tighten properly if the unit
is not in an upright position.
3. Lift adjustment knob handle and turn coun-
terclockwise to loosen chain brake.
Adjustment
Tensioning Lever
4. Align arrows by pressing tensioning le-
ver down to install position (see illustra-
tion). Remove chain brake from saw.
TENSIONING LEVER IN
INSTALL POSITION
5. Remove the plastic shipping spacer (if
present).
6. Slide guide bar behind clutch drum until
guide bar stops against clutch drum
sprocket.
Chain
Brake
Clutch Drum
7. Carefully remove new chain from pack-
(If
Knob
Handle
8. Place chain over and behind clutch, fitting
9. Fit bottom of drive links between the
10. Fit chain drive links into bar groove.
11. Pull guide bar forward until chain is snug
LOOSEN
TO REPLACE CHAIN BRAKE:
1. Align arrows on chain brake by pressing
2. Install chain brake. Turn adjustment
3. Release tensioning lever. Chain will
4. While lifting tip of guide bar, turn adjust-
7
age. Prepare the chain by checking the
proper direction. Without following the il-
lustration, it is easy to place the chain on
the saw in the wrong direction. Use the
illustration of the chain to determine the
proper direction.
CUTTERS MUST FACE IN
DIRECTION OF ROTATION
Depth Gauge
Cutters
Drive Links
the drive links in the clutch drum sprocket.
teeth in the sprocket in the nose of the
guide bar.
in guide bar groove. Ensure all drive links
are in the bar groove.
tensioning lever down to install position
(see illustration).
knob handle clockwise until knob begins
to thread onto bolt.
tighten automatically.
ment knob handle clockwise to clamp
bar. Tighten until bar is clamped secure-
ly. Hand tighten securely; do not use
tools to tighten!
Tip of
Bar
TIGHTEN
Publicité
