Rothenberger ROCAM 4 Instructions D'utilisation page 30

3.6 ROCAM
A B
The 33 kHz measuring system can penetrate masonry, stone, wood and plastic.
The intensity of the signal changes depending on the position and distance from the receiver.
3.7 Monitor unit with touchscreen
3.8 User interface start up screen
Meter counter ( Reset by touching)
LED +/-
Zoom +/-
Picture / Video
Settings
Record
Photo / Video
Gallery
Choose the type of damage in the damage catalog and confirm
bottom of the screen, and also by saving images/videos:
26
All manuals and user guides at all-guides.com
®
positioning
The grey, cylinder-shaped positioning probe (B) can be
screwed by hand between the camera head (C) and the
bending spring (A). Only finger tight, to avoid damaging
threads!
The positioning probe emits magnetic fields that are re-
ceived by the positioning receiver and are transformed
visually and audibly.
C
®
The ROCAM 4 comes with a 4GB SD card to save photo's and video's.
This can be removed for data transfer.
Connections Micro-HDMI, mini USB and SD card are on the side of the
monitor unit.
Cable measurement (Ft. / Meter)
LED Indicator (1 – 10)
open damage catalog
ENGLISH
Zoom Indicator (1.0 – 2.0)
Wi-Fi Indicator (on/off)
Battery Indicator
. This will be shown in the left