Adjusting The Master Volume; Playing A Blu-Ray Disc Player/Dvd Player - Denon AVR-1611 Manuel De L'utilisateur

ENGLISH
Important information
n Using the "Source Select" menu
SOURCE SELECT
q Press .
Display the "Source Select" menu.
Source Select
TUNER SAT/CBL
BD GAME
DVD V.AUX
TV DOCK
The currently selected input source
is highlighted.
[ ]:Source
[ENT]:Select
w Use uio p to select the input source,
ENTER
then press .
The input source is set and the source
selection menu is turned off.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at "Source Delete" (vpage 53).
• To turn off the source selection menu without selecting an input
SOURCE SELECT
source, press again.
n Using the knob on the main unit
SOURCE SELECT
Turn .
SOURCE SELECT
• Turning switches
the input source, as shown below.
BD DVD TV
TUNER DOCK
20

Adjusting the master volume

Use VOL df
n When the "Volume Display" setting
(vpage 53) is "Relative"
GAdjustable rangeH
– – –
n When the "Volume Display" setting (vpage 53) is
"Absolute"
GAdjustable rangeH 0.0 – 99.0
• The variable range differs according to the input signal and channel
level setting.
You can also operate via the main unit.
In this case, perform the following
operations.
MASTER VOLUME
Turn
volume.
Turning off the sound temporarily
Press MUTE
• The sound is reduced to the level set at "Mute Level" (vpage 53).
• To cancel, press
SAT/CBL
adjusting the master volume.
V.AUX GAME
to adjust the volume.
–80.5dB – 18.0dB
to adjust the
.
MUTE
again. Muting can also be canceled by
Playing a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/
DVD player.
1
Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
Press POWER ON to turn on
power to the unit.
3
BD DVD
Press or to switch an
input source for a player used for
playback.
4
Play the component connected to this unit.
Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.