Zone2 Setup; Option Setup - Denon AVR-1611 Manuel De L'utilisateur

ZONE2 Setup

Set the audio to play back with ZONE2.
"ZONE2 Setup" is displayed when "ZONE2" is selected with "Amp Assign".
Setting items
Level Lch –12dB – +12dB (0dB)
Adjust the left channel
output level.
Level Rch –12dB – +12dB (0dB)
Adjust the right channel
output level.
Volume Limit OFF : Do not set a maximum volume.
Make a setting for
–20dB (61) / –10dB (71) / 0dB (81)
maximum volume.
This is displayed from 0 – 99 when "Volume Display" (vpage 53) is
set to "Absolute".
Power On Level Last : Use the memorized setting from the last session.
Define the volume setting – – – (0) : Always mute when power is turned on.
that is active when the –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
power is turned on.
This is displayed from 0 – 99 when "Volume Display" (vpage 53) is
set to "Absolute".
Mute Level Full : The sound is muted entirely.
Set the amount of –40dB : The sound is attenuated by 40 dB down.
attenuation when muting –20dB : The sound is attenuated by 20 dB down.
is on.
Remote control operation
buttons
Default settings are underlined.
Setting details
Move the cursor
(Up/Down/Left/Right)

Option Setup

Make various other settings.
Setting items
Volume Control Volume Display : Set how volume is displayed.
Set the MAIN ZONE (room • Relative : Display ---dB (Min), in the range –80.5 dB – 18 dB.
where the unit is located) • Absolute : Display in the range 0 (Min) – 99.
volume setting.
• The "Volume Display" setting is applied also to the "Volume Limit" and
"Power On Level" display method.
• The "Volume Display" setting applies to all zones.
Volume Limit : Make a setting for maximum volume.
• OFF : Do not set a maximum volume.
• –20dB (61) / –10dB (71) / 0dB (81)
Power On Level : Define the volume setting that is active when the
power is turned on.
• Last : Use the memorized setting from the last session.
• – – – (0) : Always use the muting on condition when power is turned on.
• –80dB – 18dB (1 – 99) : The volume is adjusted to the set level.
Mute Level : Set the amount of attenuation when muting is on.
• Full : The sound is muted entirely.
• –40dB : The sound is attenuated by 40 dB down.
• –20dB : The sound is attenuated by 20 dB down.
Source Delete BD / DVD / TV / SAT/CBL / V.AUX / GAME / DOCK / TUNER : Select
Remove from the display input source that is not used.
input sources that are not • ON : Use this source.
used. • Delete : Do not use this source.
NOTE
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using
On-Screen Display Screensaver : Make screensaver settings.
Make the settings related to • ON : The screen saver is activated during menu display, iPod or TUNER
displays on the TV screen. screen display if no operation is performed for an approximately 3-minute
continuous period. When you press
cancelled and the screen before that screen saver started is displayed.
• OFF : Screensaver is not activated.
Text : Display the details of operation when switching surround mode,
input mode, etc.
• ON : Turn display on.
• OFF : Turn display off.
Confirm the setting
ENGLISH
Manual Setup
Default settings are underlined.
Setting details
SOURCE SELECT
uio p , the screensaver is
53
Return to previous menu
.