Tuning In Radio Stations - Denon AVR-1611 Manuel De L'utilisateur

Tuning in radio stations

Listening to FM/AM broadcasts
1
TUNER
Press to switch the input
source to "TUNER".
2
BAND
Press to select "FM" or
"AM".
FM When listening to an FM broadcast.
AM When listening to an AM broadcast.
3
Tune in the desired broadcast
station.
q To tune in automatically
(Auto tuning)
MODE
Press to light the "AUTO" indicator on the display, then
TUNING d TUNING f
use or to select the station you want to
hear.
w To tune in manually (Manual tuning)
MODE
Press to turn off the display's "AUTO" indicator, then use
TUNING d TUNING f
or to select the station you want to hear.
n Tuner (FM/AM) operation
Operation buttons
CH +, – Preset channel selection
MENU
uio p
ENTER
SEARCH
Direct frequency tuning
RETURN
BAND
MODE Switch search modes
TUNING df
Preset channel selection (1 – 8) /
0 – 9
Direct frequency tuning (0 – 9)
SHIFT Preset channel block selection
MEMORY Preset memory registration
TV POWER
TV power on/standby (Default : SONY)
TV INPUT Switch TV input (Default : SONY)
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
TUNING f
to change frequencies continuously.
• You can specify the duration of the on-screen display to be displayed
(default: 30 sec) at menu "TUNER" (vpage 54). Press
return to the original screen.
n Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
• Stations can be preset automatically at "Auto Preset"
(vpage 40). If "Auto Preset" is performed after performing "Manual
Preset", the "Manual Preset" settings will be overwritten.
1
Tune in the broadcast station you
want to preset.
2
Press MEMORY
3
Press SHIFT
(A to G) in which to preset the
channel (1 to 8 per block), then
CH +
press
the preset number.
4
Press MEMORY
the setting.
• To preset other stations, repeat steps 1 to
4.
Function
Default settings
Amp menu
Cursor operation
Block (A – G)
Enter setting
and
Channel (1 – 8)
Return
A1 – A8
FM/AM switching
B1 – B8
Tuning (up/down)
C1 – C8
D1 – D8
E1 – E8
F1 – F8
G1 – G8
Specify a name for the preset broadcast station
(Preset Name) (vpage 41)
TUNING d
or
uio p to
.
to select the block
CH – 1 – 8
, or to select
again to complete
Default Settings
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /
90.1 MHz
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
90.1 / 90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
n Listening to preset stations
1
Press SHIFT to select the memory
block (A to G).
2
CH + CH – 1 – 8
Press , or to select
the desired preset channel.
You can also operate via the main unit.
In this case, perform the following
operations.
TUNING PRESET SOURCE
Press , then turn
SELECT
to select the preset radio station.
n Direct frequency tuning
You can enter the receiving frequency directly to tune in.
1
Press SEARCH .
2
Input frequencies using the 0 – 9.
• If o is pressed, the immediately preceding
input is cancelled.
3
When setting is completed, press
ENTER.
The preset frequency is tuned in.
ENGLISH
23