Basic Operation
INPUT MODE
INPUT SELECTOR
STANDARD/NIGHT
Night mode
When listening at night or at lower volumes, the night mode
improves listenability.
NIGHT
Press and hold the
button for several seconds
to enter the night mode.
• Canceling night mode:
Press and hold the NIGHT button again.
• The night mode only works when playing program sources
recorded in Dolby Digital or DTS.
STANDARD
INPUT
SELECTOR
ENTER
INPUT MODE
Adjusting the audio delay
• When watching a DVD or other video source, the picture on the
monitor may seem delayed with respect to the sound. In this
case, adjust the audio delay to delay the sound and synchronize
it with the picture.
• The audio delay setting is stored separately for each input
source.
• This adjustment can be performed with the system setup
(
page 43) or from the remote control unit, as described
below.
1
Select the input source.
Example: DVD
(Main unit)
(Remote control unit)
2
INPUT MODE
Press the
button to set the input
mode to "AUTO".
3
Select Dolby/DTS Surround.
(Main unit)
(Remote control unit)
24
ENGLISH
4
Play a program source (DVD, etc.).
5
CURSOR D D
Press the
audio delay adjustment display.
6
CURSOR F F
Press the
time (0 ms ~ 200 ms).
CURSOR
With a movie source, for example, adjust so that the
movement of the actors' lips is synchronized with the sound.
7
ENTER
Press the
• The audio delay setting does not apply when playing in the EXT.
IN mode or in the analog input direct or stereo mode.
ENGLISH
Basic Operation
button to switch to the
G G
or
button to set the delay
button to complete the setting.