Blend-Xtract 2GO
23
a
Dispensing lid
b
Bottle
c
Sealing ring
d
Blade assembly
e
Base
Assemble as shown in illustration
Hints and Tips
Note that when the bottle is filled
to max capacity (400ml), this is
approximately two servings.
For best blending performance
always add ice/frozen ingredients to
the bottle first.
Once your drink has reached the
desired consistency, you can use the
pulse 'P' to ensure all ingredients are
thoroughly blended.
If you do not intend to consume
your drink immediately, keep it
refrigerated.
Ensure your drink is thin enough to
be able to drink from the dispensing
lid. To make a thinner drink add more
liquid.
After blending, some drinks may not
be completely smooth due to seeds
or the fibrous nature of ingredients.
Some drinks may separate on
standing, therefore it is best to drink
them straight away. Separated drinks
should be stirred before drinking.
When the dispensing lid is fitted
always keep the bottle upright.
Roto Food Cutter
24
a
Pusher
b
Body and feed tube
c
Cutting cone
c
1 slicing
c
2 coarse grate
c
3 fine grate
d
Guard/cone retainer
Assemble as shown in illustration
To assemble and use your Roto Food
Cutter
1
Raise the mixer head. Ensure both
outlet covers are fitted.
2
With the attachment body in the
position shown - align the drive tabs
23
on the end of the attachment with
the corresponding slots in the drive
outlet.
3
Fit the required cone - turn anti-
clockwise to lock in place.
4
Attach the cone retainer - align the
notch with the cut out in the body.
Turn clockwise to lock in position.
5
Fit the mixing bowl or place a
suitable bowl under the outlet.
6
Place the food in the feed tube and
use MAX speed. Gently push down
with the pusher.
Note: the pusher will only fit one way.
14
24