Télécharger Imprimer la page

shark S3601 Serie Manuel Du Propriétaire page 3

Publicité

13. DO NOT pull or carry by power cord, use
power cord as handle, close a door on the
power cord, or pull the power cord around
sharp edges or corners. Keep power cord
away from heated surfaces.
14. DO NOT unplug by pulling on power cord.
To unplug, grasp the plug not the power
cord. Do not use extension cords or outlets
with inadequate current carrying capacity.
15. DO NOT put any objects into the Steam
Nozzle openings. Discontinue use if the
steam nozzle is blocked.
16. DO NOT put hands or feet under the
steam mop. It gets very hot.
17. Use ONLY on flat, horizontal surfaces. Do
not use on walls, counters or windows.
18. DO NOT use on leather, wax polished
furniture or floors, synthetic fabrics, velvet
or other delicate, steam sensitive materials.
19. DO NOT add cleaning solutions,
vinegar, scented perfumes, oils or any
other chemicals to the water used in this
appliance as this may damage the unit or
make it unsafe for use. If you live in a hard
water area, we recommend using distilled
water in your steam mop.
Never leave any Pocket Pad in one
20.
spot while using or storing for any
period of time, as this may damage
your surfaces
.
21. Carefully remove all Pocket Pads after you
have unplugged and allowed the Steam
Mop to cool.
22. When cleaning the Steam Mop, unplug
the power cord from the electrical outlet
and clean with a dry or damp cloth. Do not
pour water or use alcohol, benzene or paint
thinner on the unit.
23. Extreme caution should be exercised when
using this appliance to clean stairs.
24. Never use Steam Mop without pocket pad
attached.
25. Keep your work area well lit.
26. Store Steam Mop indoors in a cool, dry
place.
27. To avoid circuit overload, do not operate
another appliance on the same socket
(circuit) as the steam cleaner.
28. If an extension cord is absolutely necessary,
an extension cord rated a minimum
of 15 ampere, 14 gage cord should be
used. Cords rated for less amperage may
overheat. Care should be taken to arrange
cord so that it cannot be pulled or tripped
over.
29. Always unplug and allow the Steam Mop
to cool before removing or changing mop
heads.
WARNING:
designed to clean hard floor surfaces that
will withstand high heat. Do not use on
unsealed wood or unglazed ceramic floors.
On surfaces that have been treated with
wax or some no wax floors, the sheen
may be removed by the heat and steam
action. It is always recommended to test an
isolated area of the surface to be cleaned
before proceeding. We also recommend
that you check the use and care instructions
from the floor manufacturer.
SAVE THESE
INSTRUCTIONS
Your Steam Mop is
www.sharkclean.com
3

Publicité

loading