HP OFFICEJET 4500 Guide De Mise En Marche page 27

Wireless (802.11) setup problems
This section provides information about
solving problems you might encounter when
connecting the printer to your wireless
network.
Follow these suggestions in the order listed.
Note: If you are still encountering
problems, see the problem-solving
information in the user guide (which
is available on your computer after
installing the software).
Step 1: Make sure the wireless (802.11) light is turned on
If the blue light near the printer's control
panel is not lit, wireless capabilities might
not have been turned on.
To turn on wireless, press the
button once to turn on wireless capabilities.
All manuals and user guides at all-guides.com
Or press the
printer's control panel, select Wireless
Menu, select Wireless ON/OFF, and then
select On.
(Wireless)
Wireless
After resolving the problems...
After you resolve any problems
and have connected the printer to
your wireless network, complete the
following steps for your operating
system:
Windows
Place the HP software CD into the
computer and run the software
installation program again. Select
either Install Network/Wireless Device
or Add a Device when prompted.
Mac OS
Open the HP Utility, located in the
Dock. (HP Utility is also located
in the Hewlett-Packard folder in
the Applications folder on your
computer.) Click the Application icon
on the toolbar, double-click HP Setup
Assistant, and then follow the onscreen
instructions.
(Setup) button on the
Solve setup problems 27