Publicité
Les langues disponibles
Les langues disponibles
Aspiration base installation
1.
Insert the aluminium hose's end into the aspiration base. Make sure a click is heard
indicating it is properly fixed in its place.
2.
Hold the aspiration base while you press the hose release buttons (one on each side) with
one hand and pull from the aluminium hose with the other hand in order to remove it.
Dust tank installation
1.
Holding the main body by the handle with one hand,
align it with the dust tank and then turn the dust tank
anticlockwise until a click is heard, indicating it is
properly fixed.
2.
To remove it, turn it clockwise.
Accessories installation
1.
Remove the aspiration base as it is explained in the
section before, select the desired accessory and
insert in the aluminium hose's end. A click will be
heard indicating it is properly fixed in its place.
2.
To remove any accessory, pull from it.
Unit charging
1.
Connect the power adapter to the vacuum cleaner and to the power supply.
2.
The light indicator will blink during charging and will turn steady when the charge is
completed.
3.
It is not suggested to use the vacuum cleaner during the charging process.
05116_ThunderBrush_650_MV_YV_011912'4.indd 15
05116_ThunderBrush_650_MV_YV_011912'4.indd 15
All manuals and user guides at all-guides.com
CONGA THUNDERBRUSH 650 IMMORTAL BATTERY 22.2 V
ENGLISH
15
4/12/19 11:54
4/12/19 11:54
Publicité
