VelLight LEDA317 Mode D'emploi page 6

7. Cleaning and Maintenance
 This luminaire does not have a built-in device to disconnect it from the
electric mains. Make sure to electrically isolate the luminaire before
installation or maintenance activities are performed.
 All screws should be tight and free of corrosion.
 The housing, the visible parts, the mounting supports and the installation
location (e.g. ceiling, suspension, trussing) should not be deformed,
modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
 Mechanically moving parts must not show any signs of wear and tear.
 The electric power supply cables must not show any damage. Have a
qualified technician maintain the device.
 If the protective glass [1] is damaged, disconnect the lamp immediately
from the mains. Have it repaired immediately by a qualified technician.
Do not use the lamp with a cracked or broken protective glass.
 Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol
or solvents.
 There are no user-serviceable parts.
 Contact your dealer for spare parts if necessary.
8. Technical Specifications
power supply
max. power
Epistar LED
colour temp.
beam angle
luminous flux
dimensions
weight
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
V. 01 – 08/08/2014
LEDA315/LEDA316/LEDA317
LEDA315
85-265 VAC, 50-60 Hz
12.5 W
10 W COB
810 lm
180 x 180 x
190 mm
1.55 kg
LEDA316
32.2 W
30 W COB
6500 K
90°
2654.1 lm
240 x 240 x
250 mm
2.7 kg
6
LEDA317
52.4 W
30 W COB
4389.1 lm
300 x 300 x
320 mm
4.8 kg
©Velleman nv