Astralpool LUMIPLUS PAR56 RGB 1.11 WIRELESS Manuel D'installation Et D'entretien page 4

Lampe immergée
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
5. MAINTENANCE PAR 56 RGB 1.11 WIRELESS LAMP:
This lamp does not require any type of maintenance work. If you notice that the lamp is not working properly, please
contact our customer attention service.
THIS PRODUCT DOES NOT CONTAIN ANY ELEMENTS THAT CAN BE HANDLED, DISMANTLED OR REPLACED
BY THE USER. IT IS FORBIDDEN TO ACCESS INSIDE THE PRODUCT, OTHERWISE THE GUARANTEE OF THE
6. CONTROL MOTION:
Operating frequency: 868 MHz
Range in the open field: 5 m
Batteries: 2 AAA-1.5 V batteries.
Control Motion has 6 buttons: COLOR, REFRESH, SEQUENCE, SPEED
(-/+), ON/OFF
The main functions on the remote control are:
• COLOR: selects one of 12 standard colours available.
• REFRESH: recovers the colour/sequences
• SEQUENCE: selects one of the 8 sequences available.
• SPEED: selects one of the 8 speeds available.
• ON/OFF: switches the lamp/s or spotlight/s on and off.
DO NOT PLACE HAND OVER TOP
OF THE BUTTONS ON CONTROL MOTION
7. OPERATION:
Control Motion is able to control lamp/s or spotlight/s through the buttons or movement.
In order for a lamp to respond to Control Motion, it must be placed near the lamp/s or spotlight/s. If you have more than
one lamp, place it in the middle of them to ensure optimum reception.
7.1 Remote control
- Switching spotlights on
By pressing the ON/OFF button for a few seconds, the spotlights will turn on.
- Selecting colours
The COLOR button enables you to select one of the 12 available colours. Each time the button is pressed, the colour
changes; when the last colour is reached, pressing again goes back to the first colour. The colour selected is displayed
in the Central Display.
COLOUR Nº
1
2
3
4
5
6
- Selecting sequences
The SEQUENCE button enables you to select one of the 8 available sequences. Each time the button is pressed, the
sequence changes; when the last sequence is reached, pressing again goes back to the first sequence. All sequences
work in cycles; when the last sequence is reached the cycle starts again.
PRODUCT WILL BECOME INVALID.
ATTENTION
COLOUR
Red
Green
Blue
Yellow
Cyan
Magenta
CENTRAL DISPLAY
COLOUR Nº
7
8
9
10
11
12
4
REFRESH
COLOR
SEQUENCE
SPEED -/+
ON/OFF
COLOUR
Sky-blue
Pale violet
Orange
Pink
Emerald green
White

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

59126591275912859129

Table des Matières