Enerpac HPT-1500 Fiche D'instructions page 4

Type
Model
(speed)
HPT-1500 two-speed
HPN-2000 two-speed
6.1 Keep Oil Lines Clean
When coupler halves are disconnected, always install dust caps
or plugs. Use every precaution to guard the pump and oil lines
against entry of dirt and grit. Foreign matter in the system may
result in pump or valve failure. Such damage is not covered
under warranty.
Table 1 - Specifications, HPN and HPT Series Hydraulic Hand Pumps
Maximum Pressure Rating
psi [bar]
Stage 1 Stage 2
200 [13.8] 21755 [1500]
200 [13.8] 29000 [2000]
Oil Volume per Stroke
3 3
in [cm ]
Stage 1 Stage 2
0.687 [11.26] 0.151 [2.47]
0.687 [11.26] 0.151 [2.47]
4
Usable Oil Capacity
in 3 [cm 3 ]
155 [2540]
155 [2540]