Publicité
Les langues disponibles
Les langues disponibles
Product Dimensions
Electric Shock Hazard
Electrically earth this appliance.
Do not use an extension cord or an electrical portable
outlet device.
Failure to follow these instructions can result in death,
fire, or electric shock.
@
A 220-240 volt, 50 Hz., AC only, 10-amp, fused electric
supply is required. A time-delay fuse or circuit breaker
is recommended.
It is recommended that a separate circuit
serving only this appliance be provided.
@
This washer is equipped with a power supply cord having
an earthing plug. The plug should be accessible for
disconnection from the supply.
@
if the supply cord is damaged, it must be replaced by the
Power supply cord
manufacturer, its service agent, or similarly qualified persons
in order to avoid a hazard.
4.09 m (43")
970 mm 68%")
890 mm
G5")
38 mm (1%")
705 min (27%")
650 mm (25'%")
Water inlets
180 mmm (7")
Drain hose connector
Label
Using the universal cord included with this washer:
685 mm (27")
This washer is equipped with a universal cord with
interchangeable mains plugs.
.
1. Select the appropriate mains plug assembly from those
25 mm (1")
supplied and attach it to the mains cord connector.
Water level switch and shaft
2. Snap the 2 halves of the cord lock together over the
127 mm (")
connector to retain it in position.
133 mm (514")
Standpipe Drain System
The standpipe drain requires a minimum diameter standpipe of
50 mm (2"). The minimum carry-away capacity can be no less
than 64 L. (17 gal.) per minute.
The top of the standpipe must be at least 990 mm
(39") high
and no higher than 1.83 m (72") from the bottom of the washer.
Publicité
