Publicité
Les langues disponibles
Les langues disponibles
CLEANING THE PUMP
Food residue or foreign objects that were not captured by the filters can cause the waste water pump to block. The
rinsing water level will be above the filter. Clean the pump to remove the blockage.
Warning:
Broken glass or sharp objects can cause injuries.
1. Make sure that the appliance is disconnected.
2. Remove the lower basket.
3. Remove the filters. Refer to section
4. Remove the excess water. Use a sponge or cloth.
5. Push down the cover of the drainage pump in direction 1.
6. Lift the cover of the drainage pump upwards in direction 2.
7. Remove the blockage and check the impeller of the drainage pump.
8. Push the cover of the drainage pump in direction 3 until you hear a click. Make sure that the
cover fits into the channels.
9. Install the filters.
10. Install the baskets.
8
Extra information
WATER HARDNESS LEVEL SETTINGS (SALT CONSUMPTION)
German hardness
Level
[dH]
1
0-5
2
6-11
3
12-17
4
18-22
5
23-34
6
35-50
RINSE AID CONSUMPTION SETTINGS
Level
Number of rinse aid doses that is dispensed
1
Rinse aid not dispensed
2
1 dose
3
2 doses
4
3 doses
5
4 doses
Cleaning the filters
.
French hardness [dF]
British hardness [dE]
0-9
0-6
10-20
7-14
21-30
15-21
31-40
22-28
41-60
29-42
61-90
43-63
Indicator on
Program-step indicator Wash
Program-step indicator Dry
Program-step indicator End
Program-step indicators Wash
and Dry
Program-step indicators Wash
and End
Program-step indicators Dry
and End
Indicator on
Program-step indicator Wash
Program-step indicator Dry
Program-step indicator End
Program-step indicators Wash and Dry
Program-step indicators Wash and End
English
(Figure 28)
(Figure 29)
•
49
Publicité
