Publicité
Les langues disponibles
Les langues disponibles
DELAYING THE PROGRAM
Note:
The start time of a program can be delayed for 3, 6, or 9 hours.
1. Push the timer button to delay the start time of a program. Every time you push the button, the indicator for the
next delay interval goes on.
2. Push the timer button again to increase the delay of the start time or to cancel the timer.
3. Push the start/pause button to activate the timer.
The program will start when the timer has finished.
RESETTING THE PROGRAM
You can reset the program while the appliance is running.
1. Push and hold the start/pause button for 3 seconds. The program-step indicator for End flashes.
The water inside the appliance drains in about 30 seconds.
2. Wait until the program-step for End comes on.
3. Push the on/off button to cancel the program.
ACTIVATING AND DEACTIVATING THE CHILD LOCK
Note:
When the child lock is activated, you cannot operate the buttons. When you push a button, the child-lock
indicator flashes once.
Activating the child lock
1. Push the energy save button and the timer button simultaneously for 3 seconds to activate the child lock. The
child-lock indicator goes on.
Deactivating the child lock
1. Push the energy save button and the timer button simultaneously for 3 seconds to deactivate the child lock. The
child-lock indicator goes off.
STOPPING THE APPLIANCE
Note:
The appliance is silent for 40 to 45 minutes during the drying process.
1. Wait until the program has finished and the program-step indicator for End comes on.
2. Push the on/off button to switch off the appliance.
You can slightly open the door of the appliance after you switch it off in order to decrease the drying time.
3. Wait a few minutes before you unload the appliance. The dishes are very hot and can break.
7
Cleaning and maintenance
CLEANING THE APPLIANCE
Caution:
Make sure that the appliance is off.
English
•
47
Publicité
