Publicité
CARE AND MAINTENANCE
Occasional
care and maintenance
of the unit and the software
are needed to optimize
the performance
of your unit.
To clean
the cabinet
Use a soft cloth lightly moistened
with mild detergent
solution.
Do not use strong solvents,
such as alcohol, benzine or thinner.
To clean
the heads
and tape paths+
After evety 10 hours of use, clean the heads and tape paths with
a head cleaning cassette or cotton swab moistened
with cleaning
fluid or denatured
alcohol. (These cleaning
kits are commercially
available.)
When
cleaning
with a cotton
swab
@, wipe the recording/
playback head @, erasure head@,
capstans@,
and pinchrollers
@.
After
cleaning
the heads
and tape
paths
with a liquid
head
cleaning
cassette
or a moistened
swab, wait until the cleaned
parts are completely
dried before inserting
the tapes.
To demagnetize
the heads
The heads may become
magnetized
after long-term
use.
This
may narrow
the output
range of recorded
tapes and increase
noise.
After 20 to 30 hours use, demagnetize
the heads with
any commercially
available
demagnetizer.
Care of discs
+
E
When a disc becomes
dirty, wipe the disc from the center out
with a cleaning
cloth.
After playing a disc, store the disc in its case. Do not leave the
disc in places that are hot or humid.
m
SPECIFICATIONS
MAIN
UNIT
cFM tuner
section>
Tuning range
87.5 MHz to 108 MHz
Usable sensitivity(lH~)
13.2 dBf
Antenna terminals
75 ohms (unbalanced)
cAM/MW
tuner
section>
Tuning range
531 kHz to 1602 kHz (9 kHz step)
530 kHz to 1710 kHz (10 kHz step)
Usable sensitivity
350 pVlm
Antenna
Loop antenna
<LW tuner
section>
(for K model)
Tuning range
144 kHz to 290 kHz
Usable sensitivity
1400 pV/m
Antenna
Loop antenna
<Amplifier
section>
Power output
u:
8 W + 8 W (1 kHz, T.H. D. 10%, 6 ohms)
LH:
8 W + 8 W (6 ohms, T.H.D. 10'Yo)
K:
Rated: 6 W+ 6 W (60hms, T.H.D. 17., 1
kHz/DIN 45500)
Reference:
8 W + 8 W (6 ohms, T.H. D,
10O/., 1 kHzlDIN 45324)
DIN MUSIC POWER 16W+
16 W
To be continued.
36
Publicité
