UFESA BP4560 Mode D'emploi page 13

To prevent injury, a damaged
power cord must be replaced by
the manufacturer or his customer
service or a similarly qualified
person. Only our customer service
may repair the appliance. Care shall
be taken when handling the sharp
cutting blades, emptying the bowl
and during cleaning.
Safety instructions for this
appliance
Do not use the hand blender with damp
hands and do not operate it at no load.
Do not immerse the appliance in liquid
above the blender foot-base unit connection
point. Never immerse the base unit in liquids
and do not clean in the dishwasher.
Caution when processing hot liquids. Liquids
may splash during processing.
Never place blender foot on hot surfaces
or use in very hot food.
Leave hot food to cool down to at least 80°C
before processing with the blender! Before
using the hand blender in a cooking pot, take
the pot off the hotplate.
Operate the hand blender with original
accessories only.
Do not attach or remove tools until
the appliance is at a standstill.
Recommendation: Never switch
on the appliance for longer as you need
to processing the ingredients.
The blender jug is not suitable for use
in the microwave.
All manuals and user guides at all-guides.com
Never grip the blade in the blender foot.
Never clean the blades with bare hands.
Use a brush.
Overview
Base unit
ON button
Turbo button, maximum speed
Speed selector
Foot with blade
Wall mount
Mixing jug
Lid for mixing jug
Safety devices start lock-out
Overload protection switches on.
Possible causes:
• The food has jammed the blender blade.
• Too much pressure exerted on the food
during the cutting process.
Eliminate the cause and switch on the
appliance again after cooling period.
Wall mount (B1 &B2)
(Depending on the model)
To fix the support to a wall, drill two holes