Beko VCO 92702 AB Mode D'emploi page 7

3 Usage
3.1 Intended use
The appliance has been designed for household
use and is not suitable for industrial use.
3.2 Attaching/removing the
hose
1. To attach the hose (12) push the hose cap (10)
in the direction of arrow until it is aligned with
the housing.
• The tabs on the hose cap (10) must be seated
correctly.
2. To remove the hose (12) press on the tabs on
the hose cap (10) and pull it.
3.3 Attaching/removing the
telescopic tube
1. Attach the telescopic tube (15) to the handle
(18) (you will hear a "click").
2. Press the release button (17) and pull the
handle (18) to remove the telescopic tube (15).
Vacuum Cleaner / User Manual
All manuals and user guides at all-guides.com
3. You can adjust the length of the telescopic tube
(15) by pushing the telescopic tube adjustment
ring (16) forwards and sliding the telescopic
tube back and forth.
3.4. Attaching/removing the
EasyDrive multi-purpose
™
brush
You can press the adjustment button (14) to
attach/remove the telescopic tube (15) to/from
the EasyDrive brush (13).
3.5 EasyDrive
™
brush
There are two hidden casters under your
EasyDrive brush, which has been designed for
easier maneuvers. This brush is suitable for use on
all surfaces.
If you face difficulties moving the brush on the
carpet or hard floors during vacuuming, uncover
the casters with the help of the 4x4 EasyDrive
latch.
Two additional casters hidden under the brush
will show up when you press on the latch. This
way, you can perform 4x4 cleaning on all surfaces
easily.
Adjustment
latches
4x4
latch
multi-purpose
7 / EN