Publicité
Émetteur éteint, appuyer sans relâcher à la fois sur le bouton ▼ et le bouton SET, puis appuyer sans relâcher sur le bouton
Power.
Une fois qu'il est sous tension, un message RF Muted indique que l'émetteur est en mode Coupure RF et la LED
d'alimentation clignote.
Remarque : le mode Coupure RF persiste durant les cycles de mise sous et hors tension de l'émetteur.
Hardlock Switch
The Hardlock switch, located inside the battery compartment, provides an extra level of security against accidental or unautho
rized changes.
Two Hardlock functionality options are available:
•
Hardlock: all buttons - transmitter powers on with power and control buttons locked
•
Hardlock: power only - transmitter powers on with power button locked, allowing access to control buttons.
1.
Turn on the transmitter.
2.
Simultaneously press and hold the ▼ and set buttons, and then press ▼ to access the Hardlock options menu.
3.
Select all buttons or power only.
4.
Press set to save.
5.
Remove the battery to access the Hardlock switch inside the battery compartment.
6.
Set the Hardlock switch to the locked position.
7.
Install the transmitter battery.
The transmitter will automatically power on (Auto Power Mode) with the selected lock option enabled.
Important: Use the transmitter power switch to turn on the transmitter the first time Auto Power Mode is enabled to initialize the feature.
An icon indicating the selected Hardlock option is displayed on the screen of the transmitter and receiver:
Shure Incorporated
8/18
Publicité
