To View Photos; Reset To Factory Settings - Alecto ADI-250 Mode D'emploi

7.6

To view photos:

Of each visitor pressing the doorbell a photo is taken automatically (
snapshot function must be enabled
1. with the indoor unit on stand-by, first briefly press the
indoor unit
2. press the
OR
1. with the indoor unit on stand-by, first briefly press the
indoor unit
2. press the
3. use the
4. press the
Now the last photo taken will appear in the display.
The red letter in the upper part of the screen indicates which camera has taken the
photo.
The green digits represent the photo number.
Press the
Press the
7.7

Reset to factory settings:

1. with the indoor unit on stand-by, first briefly press the
indoor unit
2. press the
3. use the
4. press the
whether to perform a factory reset (Yes ) or not (No)
Factory settings:
). You may view these photos as follows:
REPLAY button
MENU soft-button
and buttons to select the
Select soft-button
Del button to delete a photo.
BACK button to leave the photo viewer.
MENU soft-button
and buttons to select the
Select soft-button and use the
volume: level 5
brightness: level 5
key tone: on
automatic 1 snapshot: on
photo memory: empty
Snap show function.
Default Set function.
and
-64-
the automatic
button to wake up the
button to wake up the
button to wake up the
buttons to choose