Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS ALUMINIUM FRAME
CASE
1. notes on the application
Damage caused by non-observance of the following instructions is
excluded from claims of any kind.
*
These transport cases do not provide separate protection against
highly flammable or explosive materials.
*
These transport cases do not offer pressure valves and do not seal
airtight.
*
Locking mechanisms always bear the risk of injury by trapping body
parts. Always act carefully and considerately
*
Do not overload transport containers to avoid breakaway holders and
injuries from falling parts.
2. introduction
These transport cases with aluminium frames offer plenty of space for
your equipment at an excellent price/performance ratio. The side walls are
made of composite material and have a water-repellent coating. The
objects to be transported can be ideally integrated into the easy-to-
machine cube foam.
3. notes on the closure
These transport cases have two lockable latches with additional snap
lock. Please note the following information:
The lid must be completely and flush closed so that the locks can
close properly.
Before locking, it is imperative that the snap locks are closed,
otherwise the locks cannot grip properly.
Turn the lock counterclockwise to the left until the lock noticeably
jumps above the pressure point. Turn the keys clockwise to the right
to open up again.
Publicité
